Taper 25-19mm

A reduction, in the context of fittings and pump systems, is an essential component used to reduce the diameter of a connection. Specifically, the SOS PUMP® Reduction 1"-3/4" is designed to reduce a 1-inch pump outlet to a 3/4-inch male threaded connection. This type of fitting is crucial for creating compatibility between various components in a water system.

The primary purpose of a reduction fitting is to create a seamless transition between pipes or connections of different sizes. Without such a fitting, it would be impossible to connect, for example, a smaller-diameter garden hose to a larger-diameter pump outlet. This provides flexibility in the design of your water distribution system, whether for irrigation, drainage, or other applications.

The function of a taper is simple yet effective: it acts as an adapter, directing water flow from a wider to a narrower passage. This is essential in situations where standard hose or accessory sizes don't directly match the outlet of a pump or tap. The quality of the taper is crucial here, as a good seal prevents leaks and ensures system efficiency.

Choosing the right taper is crucial for the optimal operation and durability of your water supply system. Several factors must be considered to ensure you select the most suitable taper for your specific application.

First and foremost, sizing is crucial. The SOS PUMP® 1"-3/4" Reducer is specifically designed to reduce a 1" pump outlet to a 3/4" male threaded connection. Always check the exact diameters of the connections you intend to connect. Incorrect sizing can lead to leaks, reduced performance, or even damage to your equipment. If necessary, measure the inside diameter of the pump outlet and the outside diameter of the hose or accessory you intend to connect.

The material of the taper is also important. While the SOS PUMP® taper is made of high-quality material, it's important to know that various materials are available, such as brass, plastic, or stainless steel. The choice of material can depend on the fluid being transported (e.g., drinking water, chemical fluids), the system pressure, and the ambient temperature. For general water applications, such as in irrigation systems, a robust plastic or brass taper is often sufficient.

Also note the thread type. There are different thread standards, such as BSP (British Standard Pipe) or NPT (National Pipe Taper). Most fittings in the Netherlands use BSP threads. Make sure the thread of the reduction is compatible with the thread of the pump outlet and the accessory to be connected to ensure a good, leak-free connection. The SOS PUMP® reduction is designed for standard connections, which simplifies compatibility with many common systems, such as Gardena fittings.

A reduction may seem like a simple component, but its proper application and installation can make a world of difference in the performance and longevity of your plumbing system. Our specialists are happy to share some practical tips to get the most out of your SOS PUMP® Reduction 1"-3/4".

During installation, it's crucial to ensure a good seal. Always use Teflon tape or hemp with sealant on the taper threads before tightening. This prevents leaks and ensures a secure connection. Hand-tighten the taper, then use a wrench to tighten it another quarter to half a turn. Overtightening can damage the threads of both the taper and the pump outlet, which can lead to leaks or even breakage.

After installation, always check for leaks. Pressurize the system and carefully inspect all connections. Small drips may indicate an inadequate seal. In that case, you can try tightening the connection slightly or reapplying the Teflon tape/hemp. A leak-free connection is essential for efficient operation and to prevent water waste.

Although a taper requires little maintenance, it's advisable to periodically check the condition of the fittings, especially if the system is left outdoors for extended periods or is exposed to extreme temperatures. Frost can make plastic components brittle. When dismantling, for example, for winter storage, it's wise to clean the threads and check for wear. This way, your taper stays in top condition and is always ready for use.

Why do I need a reduction? A reduction is necessary to connect components with different connection diameters, such as a 1-inch pump outlet to a 3/4-inch garden hose or Gardena connector.

Can I use the SOS PUMP® Taper for drinking water? Although the taper is made of high-quality material, it's always advisable to check the manufacturer's specifications for drinking water applications. This taper is perfectly suitable for most irrigation and drainage systems.

Is installing a taper difficult? No, it's relatively simple. Using Teflon tape or hemp, you can hand-tighten the taper and then tighten it firmly with a wrench for a leak-free connection.

What happens if I use the wrong size taper? Using the wrong taper can lead to leaks, a poor seal, reduced water pressure, or even damage to your pump or hoses. Always carefully check the diameters of your connections.